Is the power button on your Samsung Galaxy phone broken? You might be able to fix a broken Samsung Galaxy power button yourself. The following instructions will walk you through the process of repairing a Samsung Galaxy power button.
The best samsung power button replacements repair stores are available in your closest proximity.
The issue could be with the power button or the power button flexes cable. You will need to remove the rear glass if you have a newer model, such as the Galaxy S6 through S10. Remove the back case of an older model, such as the Galaxy S4 or S5, to gain access to internal components.
Read this guest post to learn more about certified professionals and repair service centres that are working tirelessly to provide a better service so that people can come across moments when they actually need it.
Look no further than certified technicians
Are you looking for the best Samsung phone repair shop? It is no longer a risk when the best Samsung repair facility in your area is nearby. The qualified specialists and experts at the Samsung repair centre assist others in resolving the client’s problem.
People in need of repair services can seek assistance from the Samsung repair centre. In today’s world, computers and technology has grown a lot more. All they need is the right repair store with certified professionals to deal with the mobile phones.
The cost of the repair is also within budget. If you have any problems, you can simply look for a repair centre near your location. Samsung cell phone repair is one of the most common services provided by cell phone repair shops. They take good care of their services and can deliver items that have been repaired the same day.
Now, here are the steps that one needs to follow while looking for the best samsung power button repair.
STEP 1: Heat the edges of the rear glass with a hair dryer to soften the underlying adhesive.
STEP 2: Place the suction cup on the lower part of the rear glass and gently lift until a guitar pick can be inserted into the bottom seam.
STEP 3: Lever open or pry around the side seam with a spudger and/or guitar picks until you can remove the rear cover. Remove the battery now if you have an older model.
STEP 4: Remove the screws from the midframe and use a spudger to gently disconnect any visible cables before removing the midframe.
STEP 5: Using the spudger, disconnect all cables from the motherboard before gently removing it. BE CAREFUL, because the motherboard may have a connecting cable underneath that needs to be removed before you can fully remove it from the frame.
STEP 6: Remove the battery with the spudger (if not removed in STEP 3).
STEP 7: Remove the power button/flex cable assembly with tweezers.
STEP 8: Unplug the flex cable from the power button.
STEP 9: Replace the power button and/or flex cable, then reverse these steps to reassemble your Samsung Galaxy phone.
Conclusion
This is a broad set of guidelines. Depending on your model, specific steps may differ.
Start at STEP 1 if you have a Samsung Galaxy S6 or later model. Skip to STEP 3 if you have a Galaxy S5 or an older model. Before you begin, always turn off your phone and remove the SIM card tray and any microSD cards.
